|Product Name:||Shell Tube Heat Exchanger||Tube Material:||Stainless Steel 304 , 316l|
|Shell Material:||PP, SS304, SS316||Water Side:||Groud Water, Fresh Water, Drink Water ...|
18.6KW Stainless Steel Shell And Tube Heat Exchanger Constructed for Corrosion Resistant Performance
Shell and tube heat exchangers consist of a series of tubes. Shell & tube heat exchangers set of these tubes contains the fluid that must be either heated. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell. The second fluid runs over the tubes that are being heated or cooled, it can either provide the heat or absorb the heat required. Shell and Tube Heat Exchanger is most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. Shell Tubes Heat Exchanger are classified into fixed and Floating type Heat Exchangers. The tube sheets are completely welded to the shell and acted as shell flanges. Fixed type Heat Exchangers are used there are absolutely no chances for inter mixing of two fluids.
1.0 Refrigeration Ton = 3.5KW
|Model||Type||Cooling Capacity||Water Flow||Dimension(MM)|
|Design Working Condition: |
Chilled water in TEMP.(Ti=12℃), water out TEMP.(Tu=7℃), evaporation TEMP.(To=2℃)
Shell Tube Heat Exchanger is widely used in variety of application as a cooling solution. With right coimbination of materials they can also be used to cool or heat other mediums.
Shell Tube Heat Exchanger common amoung them is for cooling of Hydraulic Fluid and oil in engines, transmissions or hydraulic power packs.
Shell Tube Heat Exchanger using a heat exchanger is that they are often easy to service, particularly with models where a floating tube bundle the tube plates are not welded to the outer shell is available on fixed tube sheet heat exchangers
Shell and Tube Heat Exchanger is used both the properties of steel and fighting to corrosion are mandatory.
Shell Tube Heat Exchanger differs from carbon steel by the amount of chromium present and rusts readily when exposed to air and moisture.
WH offers a wide range of shell and tube heat exchangers for use in the HVAC, Petro-chemical and Food industries. Shell and tube heat exchangers are most suited to applications with medium to high temperature profiles and can be designed to withstand high pressures. HVAC steam to water packages available with condense coolers and pump sets.
Total packaged solution comprising heat exchangers, controls, pressurisation set, all mountings and, where appropriate, condensate return pump system.