 |
| Quantity: | |
|---|---|
| Product Name: | Shell Tube Heat Exchanger | Tube Material: | Stainless Steel 304 , 316l |
|---|---|---|---|
| Shell Material: | PP, SS304, SS316 | Water Side: | Groud Water, Fresh Water, Drink Water ... |
| Capacity: | 27.9KW | Water Flow: | 4.8m3/h |
Liquid / Stainless Steel / Titanium Heat Exchanger Shell And Tube Design Strong Adaptability
Shell and tube heat exchangers consist of a series of tubes. Shell & tube heat exchangers set of these tubes contains the fluid that must be either heated. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell. The second fluid runs over the tubes that are being heated or cooled, it can either provide the heat or absorb the heat required. Shell and Tube Heat Exchanger is most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. Shell Tubes Heat Exchanger are classified into fixed and Floating type Heat Exchangers. The tube sheets are completely welded to the shell and acted as shell flanges. Fixed type Heat Exchangers are used there are absolutely no chances for inter mixing of two fluids.
Catalogue:
1.0 Refrigeration Ton = 3.5KW
| Model | Type | Cooling Capacity | Water Flow | Dimension(MM) | |||||||
| KW | M3/H | A | B | C | D | E | F | G | H | ||
| WHB-5.0DKG | Single Circuit | 11.6 | 2.0 | 660 | 170 | 90 | 500 | 130 | 400 | 60 | 200 |
| WHB-8.0DKG | 18.6 | 3.2 | 950 | 170 | 90 | 790 | 190 | 600 | 60 | 200 | |
| WHB-10DKG | 23.2 | 4.0 | 1180 | 170 | 90 | 1020 | 350 | 600 | 60 | 200 | |
| WHB-12DKG | 27.9 | 4.8 | 900 | 200 | 90 | 740 | 160 | 600 | 60 | 200 | |
| WHB-15DKG | 35.0 | 6.0 | 1110 | 200 | 100 | 940 | 150 | 800 | 60 | 200 | |
| WHB-20DKG | 46.5 | 8.0 | 1420 | 200 | 100 | 1250 | 370 | 800 | 60 | 200 | |
| WHB-40DKG | 93.0 | 16.0 | 1720 | 250 | 110 | 1540 | 300 | 1200 | 60 | 260 | |
| WHB-50DKG | 116.3 | 20.0 | 2120 | 250 | 110 | 1940 | 500 | 1200 | 60 | 260 | |
| WHB-80DKG | 186.0 | 32.0 | 2100 | 315 | 120 | 1910 | 350 | 1500 | 60 | 300 | |
| WHB-120DKG | 279.1 | 48.0 | 2670 | 315 | 130 | 2460 | 600 | 1800 | 60 | 300 | |
| WHB-180DKG | 418.7 | 72.0 | 2520 | 400 | 150 | 2280 | 600 | 1600 | 60 | 400 | |
| WHB-220DKG | 511.7 | 88.0 | 3040 | 400 | 150 | 2800 | 650 | 2000 | 60 | 400 | |
| WHB-5*2EKG | Double Circuits | 23.2 | 4.0 | 1180 | 170 | 90 | 1020 | 350 | 600 | 60 | 200 |
| WHB-8*2EKG | 37.2 | 6.5 | 1180 | 200 | 100 | 1010 | 200 | 800 | 60 | 200 | |
| WHB-10*2EKG | 46.5 | 8.0 | 14200 | 200 | 100 | 1250 | 370 | 800 | 60 | 200 | |
| WHB-12*2EKG | 56.0 | 9.6 | 1460 | 225 | 100 | 1290 | 250 | 1000 | 60 | 200 | |
| WHB-15*2EKG | 70.0 | 12.0 | 1360 | 250 | 100 | 1190 | 200 | 1000 | 60 | 260 | |
| WHB-30*2EKG | 140.0 | 24.0 | 2030 | 280 | 110 | 1850 | 500 | 1200 | 60 | 260 | |
| WHB-35*2EKG | 163.0 | 28.0 | 2340 | 280 | 120 | 2150 | 500 | 1500 | 60 | 260 | |
| WHB-5*3SKG | Triple Circuits | 35.0 | 6.0 | 965 | 225 | 100 | 810 | 200 | 600 | 60 | 200 |
| WHB-8*3SKG | 55.8 | 9.6 | 1460 | 225 | 100 | 1300 | 400 | 800 | 60 | 200 | |
| WHB-10*3SKG | 69.7 | 12.0 | 1390 | 250 | 100 | 1220 | 200 | 1000 | 60 | 260 | |
| WHB-12*3SKG | 83.7 | 14.4 | 1650 | 250 | 110 | 1480 | 420 | 1000 | 60 | 260 | |
| WHB-20*3SKG | 139.5 | 24.0 | 2100 | 280 | 110 | 1920 | 550 | 1200 | 60 | 260 | |
| WHB-25*3SKG | 174.3 | 30.0 | 2050 | 315 | 120 | 1850 | 350 | 1500 | 60 | 300 | |
| WHB-30*3SKG | 209.3 | 36.0 | 2430 | 315 | 120 | 2230 | 550 | 1600 | 60 | 300 | |
| Design Working Condition: Chilled water in TEMP.(Ti=12℃), water out TEMP.(Tu=7℃), evaporation TEMP.(To=2℃) | |||||||||||
Advantages
1. U-tube design allows for differential thermal expansion between the shell and the tube bundle as well as for individual tubes
2. Less costly can floating head or packed floating head designs
3. Capable of withstanding thermal shock applications
4. Bundle can be removed from one end for cleaning or replacement
5. Shell circuit can be inspected and steam or mechanically cleaned
Shell and tube heat exchanger Applications and uses
1.Cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs.
2.Heating other mediums, such as water, beverage, orange juice and other steam.
3.They are extensively applied in chemical industrial, petroleum and energy source and etc.
Features of U-tube heat exchanger
1)Simple structure, easy manufacturing
2)Large processing quantity (1-2,000m³/h)
3)Stable and reliable operating state
Strong adaptability (applicable to almost all industries)
4)Adaptability to high temperature and pressure (≤800°C; ≤6.0Mpa)
Features of U-tube heat exchanger
Well suited for serve performance requirements with maximum thermal expansion capability
Each tube can expand and contract independently
| Product Name: | Shell Tube Heat Exchanger | Tube Material: | Stainless Steel 304 , 316l |
|---|---|---|---|
| Shell Material: | PP, SS304, SS316 | Water Side: | Groud Water, Fresh Water, Drink Water ... |
| Capacity: | 27.9KW | Water Flow: | 4.8m3/h |
Liquid / Stainless Steel / Titanium Heat Exchanger Shell And Tube Design Strong Adaptability
Shell and tube heat exchangers consist of a series of tubes. Shell & tube heat exchangers set of these tubes contains the fluid that must be either heated. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell. The second fluid runs over the tubes that are being heated or cooled, it can either provide the heat or absorb the heat required. Shell and Tube Heat Exchanger is most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. Shell Tubes Heat Exchanger are classified into fixed and Floating type Heat Exchangers. The tube sheets are completely welded to the shell and acted as shell flanges. Fixed type Heat Exchangers are used there are absolutely no chances for inter mixing of two fluids.
Catalogue:
1.0 Refrigeration Ton = 3.5KW
| Model | Type | Cooling Capacity | Water Flow | Dimension(MM) | |||||||
| KW | M3/H | A | B | C | D | E | F | G | H | ||
| WHB-5.0DKG | Single Circuit | 11.6 | 2.0 | 660 | 170 | 90 | 500 | 130 | 400 | 60 | 200 |
| WHB-8.0DKG | 18.6 | 3.2 | 950 | 170 | 90 | 790 | 190 | 600 | 60 | 200 | |
| WHB-10DKG | 23.2 | 4.0 | 1180 | 170 | 90 | 1020 | 350 | 600 | 60 | 200 | |
| WHB-12DKG | 27.9 | 4.8 | 900 | 200 | 90 | 740 | 160 | 600 | 60 | 200 | |
| WHB-15DKG | 35.0 | 6.0 | 1110 | 200 | 100 | 940 | 150 | 800 | 60 | 200 | |
| WHB-20DKG | 46.5 | 8.0 | 1420 | 200 | 100 | 1250 | 370 | 800 | 60 | 200 | |
| WHB-40DKG | 93.0 | 16.0 | 1720 | 250 | 110 | 1540 | 300 | 1200 | 60 | 260 | |
| WHB-50DKG | 116.3 | 20.0 | 2120 | 250 | 110 | 1940 | 500 | 1200 | 60 | 260 | |
| WHB-80DKG | 186.0 | 32.0 | 2100 | 315 | 120 | 1910 | 350 | 1500 | 60 | 300 | |
| WHB-120DKG | 279.1 | 48.0 | 2670 | 315 | 130 | 2460 | 600 | 1800 | 60 | 300 | |
| WHB-180DKG | 418.7 | 72.0 | 2520 | 400 | 150 | 2280 | 600 | 1600 | 60 | 400 | |
| WHB-220DKG | 511.7 | 88.0 | 3040 | 400 | 150 | 2800 | 650 | 2000 | 60 | 400 | |
| WHB-5*2EKG | Double Circuits | 23.2 | 4.0 | 1180 | 170 | 90 | 1020 | 350 | 600 | 60 | 200 |
| WHB-8*2EKG | 37.2 | 6.5 | 1180 | 200 | 100 | 1010 | 200 | 800 | 60 | 200 | |
| WHB-10*2EKG | 46.5 | 8.0 | 14200 | 200 | 100 | 1250 | 370 | 800 | 60 | 200 | |
| WHB-12*2EKG | 56.0 | 9.6 | 1460 | 225 | 100 | 1290 | 250 | 1000 | 60 | 200 | |
| WHB-15*2EKG | 70.0 | 12.0 | 1360 | 250 | 100 | 1190 | 200 | 1000 | 60 | 260 | |
| WHB-30*2EKG | 140.0 | 24.0 | 2030 | 280 | 110 | 1850 | 500 | 1200 | 60 | 260 | |
| WHB-35*2EKG | 163.0 | 28.0 | 2340 | 280 | 120 | 2150 | 500 | 1500 | 60 | 260 | |
| WHB-5*3SKG | Triple Circuits | 35.0 | 6.0 | 965 | 225 | 100 | 810 | 200 | 600 | 60 | 200 |
| WHB-8*3SKG | 55.8 | 9.6 | 1460 | 225 | 100 | 1300 | 400 | 800 | 60 | 200 | |
| WHB-10*3SKG | 69.7 | 12.0 | 1390 | 250 | 100 | 1220 | 200 | 1000 | 60 | 260 | |
| WHB-12*3SKG | 83.7 | 14.4 | 1650 | 250 | 110 | 1480 | 420 | 1000 | 60 | 260 | |
| WHB-20*3SKG | 139.5 | 24.0 | 2100 | 280 | 110 | 1920 | 550 | 1200 | 60 | 260 | |
| WHB-25*3SKG | 174.3 | 30.0 | 2050 | 315 | 120 | 1850 | 350 | 1500 | 60 | 300 | |
| WHB-30*3SKG | 209.3 | 36.0 | 2430 | 315 | 120 | 2230 | 550 | 1600 | 60 | 300 | |
| Design Working Condition: Chilled water in TEMP.(Ti=12℃), water out TEMP.(Tu=7℃), evaporation TEMP.(To=2℃) | |||||||||||
Advantages
1. U-tube design allows for differential thermal expansion between the shell and the tube bundle as well as for individual tubes
2. Less costly can floating head or packed floating head designs
3. Capable of withstanding thermal shock applications
4. Bundle can be removed from one end for cleaning or replacement
5. Shell circuit can be inspected and steam or mechanically cleaned
Shell and tube heat exchanger Applications and uses
1.Cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs.
2.Heating other mediums, such as water, beverage, orange juice and other steam.
3.They are extensively applied in chemical industrial, petroleum and energy source and etc.
Features of U-tube heat exchanger
1)Simple structure, easy manufacturing
2)Large processing quantity (1-2,000m³/h)
3)Stable and reliable operating state
Strong adaptability (applicable to almost all industries)
4)Adaptability to high temperature and pressure (≤800°C; ≤6.0Mpa)
Features of U-tube heat exchanger
Well suited for serve performance requirements with maximum thermal expansion capability
Each tube can expand and contract independently
English
简体中文